网络工程 - EIGRP 重新分配静态问题 - 吾爱随笔录

我有一个 EIGRP 问题，希望有人可以帮助我。我有一个 2821 路由器，它有三个静态路由到它所连接的交换机上存在的 VLAN。我想与我网络的其余部分共享这些路由。我认为“重新分发静态”命令可以做到这一点，但事实并非如此。

我可以在路由器和 eigrp 网络中的其他设备上运行“show ip eigrp topology”，然后网络信息就会出现，但是除了路由器之外，我无法 ping 任何 VLAN。我的 EIGRP 声明还包括“无自动汇总”，但这也无济于事。下面是“show ip eigrp topology”命令的结果。

router#sh ip eigrp XXX top 10.X.47.0 255.255.255.0
IP-EIGRP (AS XXX): Topology entry for 10.X.47.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Routing Descriptor Blocks:
10.X.0.15, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), Route is External
  Vector metric:
    Minimum bandwidth is 100000 Kbit
    Total delay is 100 microseconds
    Reliability is 255/255
    Load is 1/255
    Minimum MTU is 1500
    Hop count is 0
  External data:
    Originating router is 10.X.X.3 (this system)
    AS number of route is 0
    External protocol is Static, external metric is 0
    Administrator tag is 0 (0x00000000)